XADO RED ANTICARBON (320 ml) is a fast-acting engine decarbonizer specifically designed to effectively dissolve and remove tough carbon deposits and residues from gasoline and diesel engines. Its advanced formula targets stubborn carbon, soot, and resinous contaminants in the combustion chambers, piston rings, and cylinder walls, restoring engine performance and efficiency.
How XADO RED ANTICARBON Works
XADO RED ANTICARBON penetrates deep into carbon buildup, rapidly softening and removing accumulated deposits. Its targeted formulation cleans combustion chambers, valves, pistons, spark plugs (or glow plugs), and piston rings, ensuring smoother engine operation and restored cylinder compression. By eliminating carbon residues, it significantly improves fuel efficiency, reduces emissions, and enhances engine responsiveness.
Key Benefits
-
Effective Carbon Removal: Dissolves stubborn carbon, soot, resin, and varnish deposits.
-
Restores Piston Ring Mobility: Frees piston rings to improve sealing and engine performance.
-
Balances Cylinder Compression: Restores consistent compression levels across all cylinders.
-
Cleans Spark & Glow Plugs: Removes deposits to enhance ignition reliability and performance.
-
Safe Formula: Compatible with catalytic converters, oxygen sensors, rubber components, and engine seals.
Application & Dosage Instructions
-
Warm Engine: Ensure your engine is warm, but not hot.
-
Prepare Engine: Remove spark plugs, glow plugs, or injectors. Disconnect ignition distributor sensors (e.g., Hall sensor, ignition module). Cut off fuel supply to cylinders.
-
Apply Product: Spray XADO RED ANTICARBON into each cylinder through the provided nozzle hose for up to 5 seconds each. Replace plugs or injectors immediately to prevent evaporation. Wait for 10-20 minutes.
-
Clear Cylinders: Remove plugs/injectors again and cover cylinder openings with absorbent cloth to protect your vehicle’s paint from expelled residues. Rotate the engine briefly using the starter to expel contaminants. Repeat this procedure 2-4 times if needed.
-
Lubricate Cylinders: To avoid dry friction upon restarting, add 10-15 ml of fresh motor oil to each cylinder.
-
Reassemble & Start Engine: Reinstall spark plugs, injectors, sensors, and restore fuel supply. Start the engine and run at increased RPM for approximately 15 minutes to eliminate loosened residues through the exhaust system.
Recommended Driving
For optimal results, drive your vehicle for 3-6 miles at highway speeds after treatment to thoroughly purge all residual carbon.
Who It’s For
-
Gasoline and diesel engines of passenger cars, SUVs, trucks, and motorcycles
-
Vehicles experiencing reduced engine performance, rough idling, or increased emissions due to carbon buildup
Product Details
Note
XADO RED ANTICARBON can be safely used in conjunction with regular engine maintenance and oil changes. For maximum engine protection and longevity, pair with other products from the XADO RED product line.
CAUTION: Always follow safety guidelines and product instructions to avoid engine damage or personal injury.
