4oz Super Saver Kits

How to use your 4 oz Super Saver kit

• Open bag
• Remove 4 oz bottle of oil
• Remove 1 pipette and roller
• Unscrew the roller top or use tool to pry open gently (Careful, oil may be left in the roller - don’t tip over!)
• Shake 4 oz bottle well, while capped
• Uncap bottle
• Gently insert pipette into bottle (Do not squeeze top of pipette hard - oil may bubble and overflow!)
• Gently squeeze top of pipette to draw oil up
• Transfer oil to the roller.
• Repeat until the roller has oil to the gathering or just below (This is the part of the roller just before the neck where the glass begins to narrow in size.)
• Reinstall roller ball. The roller should sit flush. There should not be space between the plastic holding the roller ball and the glass. If there is space, it is not on yet. If you have a tool, you can place the round cut out over the roller ball and push or use the palm of your hand.
• Recap roller (if not using immediately)
• Recap bottle
• Pipettes may be washed in hot, soapy water or after several uses, recycled. (Do NOT put it in the dishwasher! Pipettes will melt!)